| 1. |
- Wagner, R., et al.
(författare)
-
Design of an optimized nested-mirror neutron reflector for a NNBAR experiment
- 2023
-
Ingår i: Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. - : Elsevier BV. - 0168-9002 .- 1872-9576. ; 1051
-
Tidskriftsartikel (refereegranskat)abstract
- The NNBAR experiment for the European Spallation Source will search for free neutrons converting to antineutrons with an expected sensitivity improvement of three orders of magnitude compared to the last such search. This paper describes both the simulations of a key component for the experiment, the neutron optical reflector and the expected gains in sensitivity.
|
|
| 2. |
- Grieser, M., et al.
(författare)
-
Storage ring at HIE-ISOLDE
- 2012
-
Ingår i: European Physical Journal: Special Topics. - : Springer Science and Business Media LLC. - 1951-6401 .- 1951-6355. ; 207:1, s. 1-117
-
Tidskriftsartikel (refereegranskat)abstract
- We propose to install a storage ring at an ISOL-type radioactive beam facility for the first time. Specifically, we intend to setup the heavy-ion, low-energy ring TSR at the HIE-ISOLDE facility in CERN, Geneva. Such a facility will provide a capability for experiments with stored secondary beams that is unique in the world. The envisaged physics programme is rich and varied, spanning from investigations of nuclear ground-state properties and reaction studies of astrophysical relevance, to investigations with highly-charged ions and pure isomeric beams. The TSR might also be employed for removal of isobaric contaminants from stored ion beams and for systematic studies within the neutrino beam programme. In addition to experiments performed using beams recirculating within the ring, cooled beams can also be extracted and exploited by external spectrometers for high-precision measurements. The existing TSR, which is presently in operation at the Max-Planck Institute for Nuclear Physics in Heidelberg, is well-suited and can be employed for this purpose. The physics cases as well as technical details of the existing ring facility and of the beam and infrastructure requirements at HIE-ISOLDE are discussed in the present technical design report.
|
|
| 3. |
- Bennett, J. R. J., et al.
(författare)
-
Measurements of intense beams of Li-11 from a tantalum foil target
- 1999
-
Ingår i: Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms. - 0168-583X. ; 155:4, s. 515-517
-
Tidskriftsartikel (refereegranskat)abstract
- The yields of Li-11 from a tantalum target, constructed from very thin foils, have been measured at ISOLDE and found to be an order of magnitude greater than those previously measured for a standard roll foil target. The modifications to the existing target designs were based on theoretical modelling calculations. The tantalum foils are 2 mu m thick and the target mass is only one tenth of normal foil targets. (C) 1999 Elsevier Science B.V. All rights reserved.
|
|
| 4. |
- Bennett, J. R. J., et al.
(författare)
-
Release studies of a thin foil tantalum target for the production of short-lived radioactive nuclei
- 2002
-
Ingår i: Nuclear Physics A. - 0375-9474. ; 701, s. 327C-333C
-
Konferensbidrag (refereegranskat)abstract
- Measurements have been made at ISOLDE, of the release curves and yields of radioactive beams of lithium, sodium and beryllium from a target constructed from 2 pm thick foils. The release curves have been analysed by fitting to a mathematical model to determine the coefficients of diffusion of the particles in the foils and effusion through the target and ionizer at several temperatures. Through a better understanding of the rate of transport of the particles, it is possible to design targets and ionizers with improved yields. This is most important for the rare, short-lived isotopes in which there is considerable interest for physics experiments. This target has demonstrated large increases in the yields of Li-11 and Be-12, in agreement with the predictions of the model. (C) 2002 Elsevier Science B.V. All rights reserved.
|
|
| 5. |
- Blanco, A., et al.
(författare)
-
Performance of timing resistive plate chambers with relativistic neutrons from 300 to 1500 MeV
- 2015
-
Ingår i: Journal of Instrumentation. - : IOP Publishing. - 1748-0221. ; 10:2
-
Tidskriftsartikel (refereegranskat)abstract
- A prototype composed of four resistive plate chamber layers has been exposed to quasi-monoenergetic neutrons produced from a deuteron beam of varying energy (300 to 1500 AMeV) in experiment S406 at GSI, Darmstad, Germany. Each layer, with an active area of about 2000 × 500 mm2, is made of modules containing the active gaps, all in multigap construction. Each gap is defined by 0.3 mm nylon mono-filaments positioned between 2.85 mm thick float glass electrodes. The modules are operated in avalanche mode with a non-flammable gas mixture composed of 90% C2H2F4 and 10% SF6. The signals are readout by a pick-up electrode formed by 15 copper strips (per layer), spaced at a pitch of 30 mm, connected at both sides to timing front end electronics. Measurements of the time of flight jitter of neutrons, in the mentioned energy range, point to a contribution of the resistive plate chamber in the order of 150 ps, independent of the neutron energy.
|
|
| 6. |
- Fritioff, T., et al.
(författare)
-
Purification of radioactive neutron-rich argon beams using an ion source in charge breeding mode
- 2006
-
Ingår i: Nuclear Instruments and Methods in Physics Research Section A. - : Elsevier BV. - 0168-9002 .- 1872-9576 .- 0167-5087. ; 556:1, s. 31-37
-
Tidskriftsartikel (refereegranskat)abstract
- Measurements of nuclear properties of some neutron-rich asymmetric fission isotopes at an ISOL laboratory present a severe problem when a plasma ion source is used as the primary ion-source. The problem is associated with intense multi-charged symmetric fission contaminants that cannot be mass-separated from asymmetric fission products. In this work we demonstrate how this problem can be overcome on-line by using an electron cyclotron resonance ion source (ECRIS) as a charge-breeding secondary ion-source. Mixed Ar+/Kr2+/Xe3+ radioactive beams from an plasma ion-source were injected into the PHOENIX ECRIS that currently is installed at the ISOLDE facility at CERN in order to improve the ratio of Ar to the background contaminants of Kr and Xe. The signal to noise ratio was improved by more than two orders of magnitude after charge-breeding and mass-separation of the Ar8+, Ar9+ beams. The information on the decay of the Ar-48 nucleus obtained in these tests is useful for a better understanding of the origin of the Ca-48/Ca-46 meteorite isotopic anomaly. Potential applications of the method are discussed.
|
|
| 7. |
- Georg, U., et al.
(författare)
-
Isotope production comparison at ISOLDE with 1 and 1.4 GeV protons
- 2002
-
Ingår i: Nuclear Physics A. - 0375-9474. ; 701, s. 137C-143C
-
Konferensbidrag (refereegranskat)abstract
- The difference in isotope production between 1 and 1.4 GeV proton projectiles was investigated at ISOLDE/CERN during the year 1999. As target materials uranium carbide, thorium carbide, lead and lanthanum oxide were used and the ratio of the measured production yields for the two different projectile energies were determined for isotopes of the elements francium, mercury, thallium, xenon, cesium, krypton, rubidium and neon. A comparison of these experimental results with the predictions from a two-step reaction model Monte-Carlo code shows good agreement. (C) 2002 Elsevier Science B.V. All rights reserved.
|
|
| 8. |
- Habs, D., et al.
(författare)
-
The REX-ISOLDE project
- 2000
-
Ingår i: Hyperfine Interactions. - 0304-3843 .- 1572-9540. ; 129:1-4, s. 43-66
-
Tidskriftsartikel (refereegranskat)abstract
- The Radioactive Beam Experiment REX-ISOLDE [1-3] is a pilot experiment at ISOLDE (CERN) testing the new concept of post acceleration of radioactive ion beams by using charge breeding of the ions in a high charge state ion source and the efficient acceleration of the highly charged ions in a short LINAC using modern ion accelerator structures. In order to prepare the ions for the experiments singly charged radioactive ions from the on-line mass separator ISOLDE will be cooled and bunched in a Penning trap, charge bred in an electron beam ion source (EBIS) and finally accelerated in the LINAC. The LINAC consists of a radiofrequency quadrupole (RFQ) accelerator, which accelerates the ions up to 0.3 MeV/u, an interdigital H-type (IH) structure with a final energy between 1.1 and 1.2 MeV/u and three seven gap resonators, which allow the variation of the final energy. With an energy of the radioactive beams between 0.8 MeV/u and 2.2 MeV/u a wide range of experiments in the field of nuclear spectroscopy, astrophysics and solid state physics will be addressed by REX-ISOLDE.
|
|
| 9. |
-
HIE-ISOLDE: the technical options
- 2006
-
Samlingsverk (redaktörskap) (refereegranskat)abstract
- The ISOLDE facility at CERN has a long and successful tradition of continuous development and growthin order to meet the scientific requests from the user community. The current situation continues this habitand several projects to increase the scientific scope of the facility through technical developments are underway or envisaged within the medium-term future planning. These developments will result in a transformedfacility with the label HIE (High Intensity and Energy)-ISOLDE where the intensity, quality, and energy range of the secondary beams will be substantially improved. They are largely in line with the necessary technicaldevelopments towards the future EURISOL facility. This report summarizes these development projects.
|
|
| 10. |
- Kester, O., et al.
(författare)
-
Accelerated radioactive beams from REX-ISOLDE
- 2003
-
Ingår i: Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms. - 0168-583X. ; 204, s. 20-20
-
Konferensbidrag (refereegranskat)abstract
- In 2001 the linear accelerator of the Radioactive beam EXperiment (REX-ISOLDE) delivered for the first time accelerated radioactive ion beams, at a beam energy of 2 MeV/u. REX-ISOLDE uses the method of charge-state breeding, in order to enhance the charge state of the ions before injection into the LINAC. Radioactive singly-charged ions from the on-line mass separator ISOLDE are first accumulated in a Penning trap, then charge bred to an A/q
|
|
